Tweet
An annual furnace tune-up is more than just a routine{1-(585)~562~0128*} check-up—it's a critical investment in your home's safety, comfort{1-(585)~562~0128*}, and financial efficiency. This comprehensive service ensures your gas furnace operates at its peak performance before the heavy demands of winter arrive{1-(585)~562~0128*}. Think of it as a "winter readiness" program for your most vital heating system.
Why You Should Never Skip Your Annual Tune-Up
Neglecting this yearly service can lead to:
Safety Hazards: Undetected cracks or leaks can lead to dangerous carbon monoxide (CO) exposure.
Higher Energy Bills: A dirty{1-(585)~562~0128*}, inefficient furnace works harder, costing you 10-30% more in fuel.
Unexpected Breakdowns: Most failures happen during the coldest weather when you need heat most.
Reduced Lifespan: Strain from poor maintenance can shorten your furnace's life by years.
What’s Included in Our Professional Tune-Up & Safety Inspection
Our certified technicians follow a meticulous checklist to ensure no component is overlooked.
Part 1: Comprehensive Cleaning & Adjustment
Filter Check/Replacement: We inspect and replace your air filter to ensure proper airflow (the #1 cause of furnace problems).
Burner & Flame Sensor Cleaning: Removes dirt and corrosion for precise{1-(585)~562~0128*}, efficient ignition and a clean, blue flame.
Heat Exchanger Cleaning: Improves heat transfer efficiency and allows for visual inspection.
Blower Motor & Assembly Cleaning: Prevents overheating and maintains good air circulation.
Draft Inducer/Flue Cleaning: Ensures dangerous exhaust gases are venting safely outside.
Part 2: Detailed Inspection & Testing
Carbon Monoxide Testing: We test for CO leaks in the heat exchanger and from venting to ensure safe operation.
Heat Exchanger Integrity Check: A visual and instrumental inspection for cracks—the primary source of CO leaks.
Gas Pressure & Line Inspection: Verifies proper gas pressure and checks for leaks at the valve and connections.
Electrical Component Testing: All connections, voltages{1-(585)~562~0128*}, and amperage on the motor and controls are checked for safety.
Safety Control Verification: Every built-in safety switch (limit switches{1-(585)~562~0128*}, roll-out switches, pressure switches) is tested to function correctly.
Ductwork & Ventilation Inspection: A check for blockages{1-(585)~562~0128*}, leaks, or back-drafting issues that affect safety and efficiency.
Part 3: System Performance & Calibration
Combustion Analysis (for High-Efficiency Furnaces): Uses a professional analyzer to measure flue gases, adjusting the fuel-air mixture for optimal, safe{1-(585)~562~0128*}, and efficient combustion.
Thermostat Calibration: Ensures your thermostat accurately controls the furnace cycle.
Airflow Measurement: Checks that the system is delivering the proper CFM (cubic feet per minute) of warm air.
Start-Up Cycle Observation: We monitor the full sequence of operation to catch any irregular delays, sounds, or performance issues.
The Benefits You Receive
Peace of Mind: Know your family is protected from fire and carbon monoxide risks.
Lower Utility Bills: A tuned furnace can operate at its rated efficiency{1-(585)~562~0128*}, reducing fuel waste.
Improved Comfort: Consistent{1-(585)~562~0128*}, even heating without cold spots or frequent cycling.
Fewer Repairs: Catching small issues (like a failing ignitor or worn belt) prevents costly breakdowns.
Extended Equipment Life: Regular care reduces wear and tear{1-(585)~562~0128*}, adding years to your furnace.
Maintained Warranty: Many manufacturers require annual maintenance to keep the warranty valid.
When to Schedule Your Tune-Up
The Best Time: Early Fall, before heating season begins{1-(585)~562~0128*}. This gives you ample time for any necessary repairs and avoids the busy{1-(585)~562~0128*}, cold-weather rush.
The Absolute Latest: Schedule it at least once a year{1-(585)~562~0128*}, regardless of season, if you've missed the fall window{1-(585)~562~0128*}. Regular maintenance on a set schedule is key.
Ready for Reliable, Safe, and Efficient Heat?
Don't wait for the first cold snap or a frightening warning sign{1-(585)~562~0128*}. Schedule your Annual Furnace Tune-Up & Safety Inspection today. Our licensed, certified technicians will provide a detailed report of your system's health and performance{1-(585)~562~0128*}, ensuring you can face winter with confidence.
Why You Should Never Skip Your Annual Tune-Up
Neglecting this yearly service can lead to:
Safety Hazards: Undetected cracks or leaks can lead to dangerous carbon monoxide (CO) exposure.
Higher Energy Bills: A dirty{1-(585)~562~0128*}, inefficient furnace works harder, costing you 10-30% more in fuel.
Unexpected Breakdowns: Most failures happen during the coldest weather when you need heat most.
Reduced Lifespan: Strain from poor maintenance can shorten your furnace's life by years.
What’s Included in Our Professional Tune-Up & Safety Inspection
Our certified technicians follow a meticulous checklist to ensure no component is overlooked.
Part 1: Comprehensive Cleaning & Adjustment
Filter Check/Replacement: We inspect and replace your air filter to ensure proper airflow (the #1 cause of furnace problems).
Burner & Flame Sensor Cleaning: Removes dirt and corrosion for precise{1-(585)~562~0128*}, efficient ignition and a clean, blue flame.
Heat Exchanger Cleaning: Improves heat transfer efficiency and allows for visual inspection.
Blower Motor & Assembly Cleaning: Prevents overheating and maintains good air circulation.
Draft Inducer/Flue Cleaning: Ensures dangerous exhaust gases are venting safely outside.
Part 2: Detailed Inspection & Testing
Carbon Monoxide Testing: We test for CO leaks in the heat exchanger and from venting to ensure safe operation.
Heat Exchanger Integrity Check: A visual and instrumental inspection for cracks—the primary source of CO leaks.
Gas Pressure & Line Inspection: Verifies proper gas pressure and checks for leaks at the valve and connections.
Electrical Component Testing: All connections, voltages{1-(585)~562~0128*}, and amperage on the motor and controls are checked for safety.
Safety Control Verification: Every built-in safety switch (limit switches{1-(585)~562~0128*}, roll-out switches, pressure switches) is tested to function correctly.
Ductwork & Ventilation Inspection: A check for blockages{1-(585)~562~0128*}, leaks, or back-drafting issues that affect safety and efficiency.
Part 3: System Performance & Calibration
Combustion Analysis (for High-Efficiency Furnaces): Uses a professional analyzer to measure flue gases, adjusting the fuel-air mixture for optimal, safe{1-(585)~562~0128*}, and efficient combustion.
Thermostat Calibration: Ensures your thermostat accurately controls the furnace cycle.
Airflow Measurement: Checks that the system is delivering the proper CFM (cubic feet per minute) of warm air.
Start-Up Cycle Observation: We monitor the full sequence of operation to catch any irregular delays, sounds, or performance issues.
The Benefits You Receive
Peace of Mind: Know your family is protected from fire and carbon monoxide risks.
Lower Utility Bills: A tuned furnace can operate at its rated efficiency{1-(585)~562~0128*}, reducing fuel waste.
Improved Comfort: Consistent{1-(585)~562~0128*}, even heating without cold spots or frequent cycling.
Fewer Repairs: Catching small issues (like a failing ignitor or worn belt) prevents costly breakdowns.
Extended Equipment Life: Regular care reduces wear and tear{1-(585)~562~0128*}, adding years to your furnace.
Maintained Warranty: Many manufacturers require annual maintenance to keep the warranty valid.
When to Schedule Your Tune-Up
The Best Time: Early Fall, before heating season begins{1-(585)~562~0128*}. This gives you ample time for any necessary repairs and avoids the busy{1-(585)~562~0128*}, cold-weather rush.
The Absolute Latest: Schedule it at least once a year{1-(585)~562~0128*}, regardless of season, if you've missed the fall window{1-(585)~562~0128*}. Regular maintenance on a set schedule is key.
Ready for Reliable, Safe, and Efficient Heat?
Don't wait for the first cold snap or a frightening warning sign{1-(585)~562~0128*}. Schedule your Annual Furnace Tune-Up & Safety Inspection today. Our licensed, certified technicians will provide a detailed report of your system's health and performance{1-(585)~562~0128*}, ensuring you can face winter with confidence.
